모든 카테고리
power distribution poles
90 발견 된 물건
교차하는 팔을 가진 전기 배급 선 송전 폴란드
Electrical Distribution Line Power Transmission Poles With Cross Arm Material:high quality Q345 hot rolled steelMounting Height:3-30m or according to the requirements of customersShape of pole:Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets:Single or double brackets are in the shape and dimension as per customers requirementBase plate:Base
송전 폴란드 8각형 33KV 강철 전봇대 18m에 의하여 직류 전기를 통했습니다
33KV 18m Galvanized octagonal Power Transmission Poles design steel tower Specifications 1. Protecion class: IP65 2. Light source: 100W-400W high-pressure sodium lamp 3. Rated voltage and frequency: 220V(±10%)/50Hz 4. Caliber: 60mm 5. Protecting class against eletric shock: Type I 6. Lamp in die-cast aluminum, coated with powder polyes ter after anti-corrosive treatment 7. A lamp body with a built-ray lens 8. Fasteners screws, all stainless steel 9. Applicable height: 6m-12m
69kv 전선을 위한 전기 직류 전기를 통한 송전 폴란드
Electrical Galvanized Power Transmission Poles For 69kv Electrical Line COST ----- Install cost The electrical part was designed can be installed within 6 minutes by using the non-screw connector, which definitely reduce your installation time and create lot of savings on the labor cost. The arm was designed can be connected with the pole by two arc fixing plate with two long screws. The new solar panel bracket was composed by sleeve, angle iron and U-steel fixed by screw, It
12m 전선 프로젝트를 위한 6KN에 의하여 직류 전기를 통하는 송전 폴란드
12m 6KN Power Transmission Poles For Electrical Line Project Specifications 1. Protecion class: IP65 2. Light source: 100W-400W high-pressure sodium lamp 3. Rated voltage and frequency: 220V(±10%)/50Hz 4. Caliber: 60mm 5. Protecting class against eletric shock: Type I 6. Lamp in die-cast aluminum, coated with powder polyes ter after anti-corrosive treatment 7. A lamp body with a built-ray lens 8. Fasteners screws, all stainless steel 9. Applicable height: 6m-12m (according to
전선, /BV/ISO를 위한 송전 폴란드가 고전압에 의하여 직류 전기를 통했습니다
High Voltage Galvanized Power Transmission Poles For Electrical Line Specifications 1. Protecion class: IP65 2. Light source: 100W-400W high-pressure sodium lamp 3. Rated voltage and frequency: 220V(±10%)/50Hz 4. Caliber: 60mm 5. Protecting class against eletric shock: Type I 6. Lamp in die-cast aluminum, coated with powder polyes ter after anti-corrosive treatment 7. A lamp body with a built-ray lens 8. Fasteners screws, all stainless steel 9. Applicable height: 6m-12m
9m 전선 프로젝트를 위한 200Dan에 의하여 직류 전기를 통하는 Conicial 송전 폴란드
9m 200Dan Galvanized Conicial Power Transmission Poles For Electrical Line Specifications 1. Protecion class: IP65 2. Light source: 100W-400W high-pressure sodium lamp 3. Rated voltage and frequency: 220V(±10%)/50Hz 4. Caliber: 60mm 5. Protecting class against eletric shock: Type I 6. Lamp in die-cast aluminum, coated with powder polyes ter after anti-corrosive treatment 7. A lamp body with a built-ray lens 8. Fasteners screws, all stainless steel 9. Applicable height: 6m-12m
9m 전선을 위한 200Dan에 의하여 직류 전기를 통하는 강철 송전 폴란드
9m 200Dan Galvanized Steel Power Transmission Poles For Electrical Line Specifications 1. Protecion class: IP65 2. Light source: 100W-400W high-pressure sodium lamp 3. Rated voltage and frequency: 220V(±10%)/50Hz 4. Caliber: 60mm 5. Protecting class against eletric shock: Type I 6. Lamp in die-cast aluminum, coated with powder polyes ter after anti-corrosive treatment 7. A lamp body with a built-ray lens 8. Fasteners screws, all stainless steel 9. Applicable height: 6m-12m
16m 전선 프로젝트를 위한 1800Dan 송전 폴란드
16m 1800Dan Power Transmission Poles For Electrical Line Project Specifications Packed with good cartons and bubble wrap(the pole can be packed by bubble wrap,the lamp head can be packed by carton.Specific details according to customer's demands Material Q345 Height 5-15m, Shape Round,octagonal,polygonal Brackets Double brackets in the shape as customer's request Base plate Square or round in shape with slottes holes for anchor bolt Length Within 14m once forming without slip
AWS D1.1 뜨거운 복각 전선 프로젝트를 위한 직류 전기를 통한 송전 폴란드
Hot Dip Galvanized Power Transmission Poles For Electrical Line Project Specification: 1) Steel materials conform to ASTM A36 with Q235(S235,SS400),Q345(S355JR), Q460,etc 2) Welding: Welding complies with CSA and AWS, AWS D1.1 standard.The welders have got corresponding certificate after testing and inspection. 3) Finish: Hot-dip galvanized in accordance with ASTM A123. 4) Pole Height: All available 5) Pole shape: Conical, Round, Polygonal---Octagonal, Dodecagonal, Hexadecago
