모든 카테고리
power distribution poles
90 발견 된 물건
69kv 강철 전화선용 전주, 뜨거운 복각 직류 전기를 통한 배전 폴란드
Specification Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Safety Factor Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 Design Load in Kg 300~ 1000 Kg appliced to 50cm from the to pole Marks Nane palte through rivert or glue ,engrave ,emboss as per customer requirement Joint of Poles Insert mode,innerflange
갈바니즈션과 90ft 100ft 110ft 배전 전신주
Specifications 1. Protecion class: IP65 2. Light source: 100W-400W high-pressure sodium lamp 3. Rated voltage and frequency: 220V(±10%)/50Hz 4. Caliber: 60mm 5. Protecting class against eletric shock: Type I 6. Lamp in die-cast aluminum, coated with powder polyes ter after anti-corrosive treatment 7. A lamp body with a built-ray lens 8. Fasteners screws, all stainless steel 9. Applicable height: 6m-12m (according to customers' requirment) 10. Working environment:-35°C--+55°C
11M 종류 3 아프리카 송전 폴란드 AWS D1.1에 의하여 직류 전기를 통하는 금속 폴란드
11M Class 3 Africa galvanized power distribution pole AWS D1.1 Material: minimum yield strength is 345Mpa Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement Base plate: Base
둥근 가늘게 한 직류 전기를 통한 강철 송전 폴란드/전력 폴란드
Round Tapered Galvanised Steel Power Transmission Poles For Electrical Power Transmission Lines Power Distribution Poles are required especially in populated areas where these poles are favoured because they require less space than lattice towers and are more acceptable visually. Weighing of the steel made Power Distribution poles is approximately 50-70% less than comparable wood structures, the steel poles are easier and less expensive to handle and install.Design of the
S500MC 전원 분배를 위해 실용 12m 직류 전기를 통한 강철 송전 폴란드
S500MC 12m Galvanized Steel Pole Utility Line For Power Distribution Specification Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement
전원 분배 선을 위한 강철 폴란드/직류 전기를 통한 강철 폴란드가 8m에 의하여 5KN 직류 전기를 통했습니다
8m 5KN Galvanized Steel Pole For Power Distribution Line Exported To Africa Specification: 1) Steel materials conform to ASTM A36 with Q235(S235,SS400),Q345(S355JR), Q460,etc 2) Welding: Welding complies with CSA and AWS, AWS D1.1 standard.The welders have got corresponding certificate after testing and inspection. 3) Finish: Hot-dip galvanized in accordance with ASTM A123. 4) Pole Height: All available 5) Pole shape: Conical, Round, Polygonal---Octagonal, Dodecagonal,
전기 배급 선 프로젝트를 위한 강철 전력 전송 폴란드
Electrical Power Transmission Poles For Electricity Distribution Line Project Company Information Established in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on. We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV
24.5M 힘 전기 배급 선 프로젝트를 위한 강철 전력 전송 폴란드
24.5M Power Steel Electrical Power Transmission Poles For Electricity Distribution Line Project Company Information Established in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on. We have plenty of export experience . Since our first overseas order from Pakstan
배급 선 프로젝트, 강철 전봇대를 위한 전력 전송 폴란드
Electrical Power Transmission Poles For Distribution Line Project Specification Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement
