모든 카테고리
electrical power poles
2250 발견 된 물건
원뿔 220 KV Dodecagonal 20M 교차하는 팔을 가진 12 KN 강철 전화선용 전주
220KV Dodecagonal 20M 12KN Steel Electric Power Poles with Cross Arm Specification: Height From 9 meter to 100 meter Suit for Electric Power Transmission and Distribution Shape Polygonal or Conical Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm Q235B/A36, Minimum Yield Strength ≥ 235 N/mm As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Power Capacity 10kV to 220kV Tolerance of the dimension According to client’s requirement. Surface treatment Hot
3mm 간격을 가진 8KN 10m 배급 동력선 강철 전송 폴란드
10m 8KN Electrical Power Pole For Distribution Power Line With 3mm Thickness Factory Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission
전기 배급을 위한 직류 전기를 통한 전송 동력선 폴란드 십자가 팔
Octagonal Transmission Electrical Power Pole For Power Distribution Line Specifications Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement Base plate: Base plate is square or
가연 광물을 가진 36m 강철 전화선용 전주가 고전압 가공선 뜨거운 복각에 의하여 직류 전기를 통했습니다
36m Steel Utility Poles Hot Dip Galvanized Electric Power Pole For High Voltage Overhead Line with Bitumen Specification: Material: All of our material are purchased from famous mill factory to assure the quality. 1.A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material . 2.Before put into production ,all the material must pass the chemical and
전력 수송 선/관 강철 폴란드가 10kV 뜨거운 복각에 의하여 직류 전기를 통했습니다
10kV hot dip galvanized electric power transmission line tubular steel pole Factory Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission
15m 교차하는 팔 부속품 뜨거운 복각 전기 요법을 가진 Dan 1200년 8각형 강철 전송 폴란드
15m 1200Dan Octagonal Conical Electrical Power Pole With Cross Arm Accessories Product information The power pole of our company are made from quality sheets through bending,forming, automatic welding, hot dip galvanization and powder coating. We owned advanced production-line, it included Flatting machine, Steel plate shearer, bending machine,Auto-closed up machine, submerged arc welding machine and powder coating line, and our workmanship and quality control was achieved
Setion 8각형 모양을 가진 필리핀 프로젝트를 위한 35FT 전원 분배 폴란드
Product name 35FT Electrical Power Pole Distribution For Philippines Project With Octagonal Setion Shape Material ASTM 572 grade 50 with yieled strength mo less than 450mpa Design service available,just offer design parameter Certificate ISO 9001:2008,etc Destruction test Available Welding method AWS D1.1 with penatration rate no less than 80%-100% OEM Available Wind pressure 5-300KM/H Pre-shipment test Available The products made by us is high resisitivity against heat
가연 광물이 있는 10kv 30kv 1000 단 10m 12m 팔각형 기둥
10KV 30KV 1000 daN 10M 12M Octagon Electric Power Poles Specification: Material: Hot rolled steel, Q235,Q345,S235,S355,SS400,Gr 50 Yield strength of Material: Minimum yield strength>=235n/mm2 for Q235, S235 and SS400 Minimum yield strength>=345n/mm2 for Q345 S355 and Gr 50 Pole’s height: 3m –15m Length of one part Within 16m once forming without slip joint Wall thickness: 2.3mm-30mm Pole's Shape Can be made: Round, Polygonal, Taper Octagonal, Taper round, Round conical, Taper
8KN S500MC 3mm 간격을 가진 강철 기준 10m 배급 동력선 폴란드
8KN S500MC Steel Standard 10m Distribution Power Line Steel Transmission Pole With 3mm Thickness Factory Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132
