logo

60FT Customizable Mounting Height Electrical Power Pole for transmission line

1 40HQ
MOQ
협상 가능
가격
60FT Customizable Mounting Height Electrical Power Pole for transmission line
풍모 갤러리 제품 설명 따옴표를 요구하십시오
풍모
제품 사양
치수 공차: +- 2%
바람 저항: 3-500km/h
재료: GR50 GR65 S500 S355
키: 69kV 16m
용접: 용접은 CWB의 국제 용접 표준으로 확인합니다
분말 코팅: 순수한 폴리 에스테르 파우더 페인팅, 색상은 선택 사항입니다
설계: 지진 중 8 학년에 반대하여
제품 이름: 전송 라인을위한 60 피트 사용자 정의 가능한 장착 높이 전원 전력 극
기본 정보
원래 장소: 중국
브랜드 이름: Milky Way
인증: ISO//BV
모델 번호: 전송 라인을위한 60 피트 사용자 정의 가능한 장착 높이 전원 전력 극
결제 및 배송 조건
포장 세부 사항: 고객 요청에 따라
배달 시간: 보통 확인하는 것 2 주 뒤에
지불 조건: t/t
공급 능력: 300개 부분은 하루에 막대기를 씁니다
제품 설명

 

 

Product Description

Company Information

 

Established in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .

Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on.

 

We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas ,including America,Australia ,Russia ,Genmery ,Span,Philippines ,Malaysia , Dominica, Congo, Togo and Guniea so on.

 

 

Specification

 

Material: high quality Q345 hot rolled steel
Mounting Height: 3-30m or according to the requirements of customers
Shape of pole:

Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine

 

Brackets: Single or double brackets are in the shape and dimension as per customers requirement
Base plate:

Base plate is square or round in shape with slotted holes for anchor bolt and dimension as per customers requirement

 

Groung mounted:

The length buried underground as per customers requirement

 

Galvanizing:

 

Hot dip galvanization with thickness of 80-100µm average

 

Powder coating: Pure polyester powder painting, color is optional

 

 

60FT Customizable Mounting Height Electrical Power Pole for transmission line 0

 

Production Process

 

Our factory own advance production line, machine including bending calibration machine, hydraulic plate shears machine, shears machine, slitting machine, 208T hydraulic straightener, etc. All the purpose is to produce good quality steel poles.

 

The fabrication process as cut plate, bending, forming, automatic welding, drill holes, quality check before galvanized, hot dip galvanized and powder coating, finally quality check according by client’s required.

 

 

 

Features

 

1. We can supply the product base on client required drawing ,but also can supply the design for any kinds of lamp poles ,electric poles ,street lighting poles, high mast poles ,garden light poles , outdoor lighting ,outdoor lighting poles ,flag poles ,traffic light poles ,lighting ,road lighting pole.

2. Matercial :hot rolled coil from Q235 to Q460 ,ASTM573 GR65, GR50 ,SS400, SS490,ST52-3

3. Deal: Hot dip galvanized Following ASTM A 123 or any other stardand by client required.

4. Packing: Plastic bulble , Mat &Straw Bale or following client required

5. Length : within 16meters once forming( single section)

6. Thickness: from 1mm to 25mm

7. Shape: polygonal(6-side,8side,12-side,16side) round tapered.

8. 110KV to 220kv

9. Easy install and maintenance.

 

60FT Customizable Mounting Height Electrical Power Pole for transmission line 1

 

추천된 제품
우리와 연락하기
담당자 : Ms. Delia Wang
전화 번호 : +86 132 7510 1534
팩스 : 86-510-87843488
남은 문자(20/3000)