모든 카테고리
power line pole
90 발견 된 물건
직류 전기를 통한 86um 강철 전신주 옥외 전기 전송 라인
Galvanized ASTM A 123 Outdoor Electrical Steel Transmission Line Poles with Cross Arm Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually
8각형 사업용 전력이 뜨겁게 막대기로 받치는 댄은 12m 800명 직류 전기로 자극되어서 하강합니다
12m 800Dan Octagonal Electrical Power Poles , Hot Dip Galvanized Power Distribution Poles Specification Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Safety Factor Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 Design Load in Kg 300~ 1000 Kg appliced to 50cm from the to pole Marks Nane palte through rivert or
전력 전달 라인 1mm ~ 36mm에 138KV 파이브럴 스틸 전원 전극
138KV Tubular Steel Pole For Power Transmission Line Specifications: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Torlance of the dimenstion +- 2% Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor for
고도가 맞춤화된 전력 전송을 위한 핫 디프 진열 전기 전력 기둥
6-18m hot galvanized steel power metal pole for transmission line Steel Electric Pole Specifications Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per
Q345 강철 재질 및 순수한 폴리 에스테르 분말 코팅을 갖는 외부 전기 분포 라인을위한 22m 철강 전원 극
Product Description 22m Power Transmission Poles For Outside Electrical Distribution Line Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers
전송선을 위한 강철 상승 가로대를 가진 8각형 35FT 110kv 강철 전화선용 전주
Octagonal 35FT 110kv Steel utility Pole with steel climbing rung for transmission line Quick Infromation Power Distribution Poles are required especially in populated areas where these poles are favoured because they require less space than lattice towers and are more acceptable visually. Weighing of the steel made Power Distribution poles is approximately 50-70% less than comparable wood structures, the steel poles are easier and less expensive to handle and install.
11M 금속 전화선용 전주 3mm 강철 플레이트의 둘레에 전기 전송 힘
Round 11M Steel Tubular Pole Gr50 material 3mm steel plate for electric power transmission line Application: Tapered Tubular Substation Structures Steel Substation Structures Custom Substation Designs Closed Section Tubes I-Beam Structures Lattice Structures Steel Structures with Higher Translational Stiffness Low Profile Aesthetically Pleasing Structures Higher Terminal-Stop/Take Off Angles Higher Tension Wires Due to Design Substation Structures Exceed Wood Pole Standards
전원 분배 행을 위한 16M 500 Dan에 의하여 직류 전기를 통하는 강철 폴란드 시간 50 년 생활
Multi side Bitumn AWSD1.1 Galvanised 16M 500 Dan Steel Poles for Power Distribution Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Specifications: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually
외부 배급 선 폴란드 전기 직류 전기를 통한 강철 반대로 부식 10 KV - 550 KV
Galvanized Outside Electric Steel Transmission Line Poles 1mm - 36mm Wall Thickness Descripition of material: 1. Poles are made by the high-quality metal plants,which were molded into the multi-row cone-shaped vertical steel barwith hot galvanized anti-corrosion treatment 2. Light plate frame is made by high-quality stainless steel 3. Fastened bolts and nuts of stainless steel Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal
