모든 카테고리
power line pole
90 발견 된 물건
11.8m 800 댄 강철 파워 폴대를 활성화하는 고온 침지
11.8m 800 daN Cameroon Hot Dip Galvanization Steel Power Pole For Electrical Transmission Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material
테이퍼 8각형 CCTV 아연 도금 금속 33kv 전신주
Pole Tower Tapered Octagonal Cctv Galvanized Metal 33kv Transmission Line Steel Tubular Power Utility Lattice Electric Pole 69kv Specifications: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Torlance of the dimenstion +- 2% Power 10 KV ~550KV
전송선 격자 강철 폴란드 10kv - 220kv
Transmission Line Steel Pole(10KV- 220KV),lattice steel poles Specifications: Height From 6 m to 15 m Suit for Airport ,seaport,plaza,stadium ,square,highway, street way etc Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Lamp power 20 W- 400 W (HPS/MH) 220V (+-10%) /50Hz
배급선 전력 폴란드 직류 전기를 통한 15m 벽 간격 4mm
Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2
전송선 프로젝트에 다각형 11.8m 4000 Dan 전력 폴란드
Specifications: Height From 9 meter to 100 meter Suit for Electric Power Transmission and Distribution Shape Polygonal or Conical Material Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 Power Capacity 10kV to 220kV Tolerance of the dimension According to client’s requirement. Surface treatment Hot dip galvanized Following ASTM A 123, or any other standard by
30ft 전력 극 직류 전기를 통한 강철 Nea 기준
30ft Galvanized Steel Poles Manufacturer NEA Standard power pole electrical Specifications Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement Base plate: Base plate is square or
50ft 55ft 60ft 65ft 전력 극 다중 피라미드
Factory Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas
33개 킬로볼트 Lv 전기적인 분포 전선 아연도강 막대기
33kv LV Electrical Galvanised Steel Pole , Distribution Line Steel Power Pole Specifications 1. Protecion class: IP65 2. Light source: 100W-400W high-pressure sodium lamp 3. Rated voltage and frequency: 220V(±10%)/50Hz 4. Caliber: 60mm 5. Protecting class against eletric shock: Type I 6. Lamp in die-cast aluminum, coated with powder polyes ter after anti-corrosive treatment 7. A lamp body with a built-ray lens 8. Fasteners screws, all stainless steel 9. Applicable height: 6m
직류 전기로 자극된 8각형인 35 Ft 70 Ft 90ft 강철 파워 폴대 송전선
35FT 70FT 90FT Transimission Line Octagonal Galvanized Steel Power Pole Descripition of material: 1. Poles are made by the high-quality metal plants,which were molded into the multi-row cone-shaped vertical steel barwith hot galvanized anti-corrosion treatment 2. Light plate frame is made by high-quality stainless steel 3. Fastened bolts and nuts of stainless steel Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical
