모든 카테고리
galvanized street light pole
90 발견 된 물건
10kv - 전기 요법 지상 처리를 가진 550kv 강철 관 폴란드
10kv - 550kv Steel Tubular Pole With Galvanization Surface Treatment Production Process Our factory own advance production line, machine including bending calibration machine, hydraulic plate shears machine, shears machine, slitting machine, 208T hydraulic straightener, etc. All the purpose is to produce good quality steel poles. The fabrication process as cut plate, bending, forming, automatic welding, drill holes, quality check before galvanized, hot dip galvanized and
Gr65 100FT MV 직류 전기로 자극된 Q235 단일 극자 탑
Gr65 100FT MV Galvanized Mono Pole Tower Steel Monopole Transmission Tower Specifications: Suit for Communication distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Torlance of the dimension +- 2% Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8
배전을 위해 활성화된 35ft 40ft 전기 철주 고온 침지
35FT 40Ft Hot dip Galvanized power distribution pole price electric steel pole Specifications: Types Length 45ft 50ft 55ft 60ft 65ft 70ft 13.75m 15.25m 16.80m 18.30m 19.85m 21.35m B ( 0°-2°) Top diameter (mm) 200 200 200 200 200 200 Butt diameter (mm) 345 370 395 415 435 455 Thickness (mm) 6 6 6 6 6 6 E ( 2°-15°) Top diameter (mm) 200 200 200 200 200 200 Butt diameter (mm) 545 585 625 660 700 740 Thickness (mm) 6 6 6 6 6 6 C ( 15°-30°) Top diameter (mm) 250 250 250 250 250
전기 강철 튜브 타워 스톨 피침형 가연 전력 전송 550kV
High Quality Conical Galvanized Power Transmission Electric Steel Tubular Tower Pole Specification Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per
11m Q345 강철 전력 전송 전구 80-100μM 가유화
High Quality 11m Q345 Steel Pole with 80-100μm Galvanization for Power Transmission Specification Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per
35 FT에 의하여 직류 전기를 통하는 강철 관 폴란드 69명 Kv 강철 전송 폴란드 파키스탄 기준
35FT Galvanized Steel Tubular Utility Pole For 69kv Philippines Transmission Line Options: • The Power Distribution Pole is available in various length, diameters and hole arrangements. • Multisided or Tapered round variations. • The Power Distribution Pole covers Voltage between 10-220KV. • The Power Distribution Pole includes: suspension pole, stain pole and angle pole in different forms. • Standard Corrosion Protection: hot dip galvanising (above and in-ground) •
450mm 플랜지 크기를 가진 증명서 22m 30KN Gr65 강철 전봇대
Certification 22m 30KN Gr65 Steel Power Pole With 4mm Wall Thickness Descripition of material: The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with NFA35503 Standard Class 1. Galvanization Standard:NFA91121 Average thickness of the galvanization:Not less than 86μm. Manufacture Tolerance -Component
전기 전송, 발 길이 90를 위한 고전압 뜨거운 복각 금속 전등 기둥
High Voltage Hot Dip 90FT Galvanized Steel Power Pole For Electrical Transmission Specification Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per
전력 전송선 프로젝트를 위한 직류 전기를 통한 실용적인 강철 관 폴란드
Galvanized Utility Steel Tubular Pole For Electrical Power Transmission Line Project Production Process Our factory own advance production line, machine including bending calibration machine, hydraulic plate shears machine, shears machine, slitting machine, 208T hydraulic straightener, etc. All the purpose is to produce good quality steel poles. The fabrication process as cut plate, bending, forming, automatic welding, drill holes, quality check before galvanized, hot dip
