모든 카테고리
electrical power poles
90 발견 된 물건
필리핀 전송선을 위해 직류 전기를 통하는 대우된 35F 전력 극
Treated 35F Electric Power Pole Galvanized For Philippines Transmission Line Mechanical Property The metal supports are designed to withstand the nominal force F and the pressure of the wind V applied at 0.25m from the top. Under these loads, the safety factor with respect to the elastic limit of the steel is larger than 1.8. The post also resists a torque equal to (F+V) ×1m. Tests shows the load intervened when breaking is around 2 times of design load. Galvanization
필리핀 30000 MT/수년간 전력 폴란드를 입히는 분말 25 FT 고도
25FT Height Powder Coating Electrical Power Pole For Philippines Specifications 1. small floor area & large bearing load 2. reasonable distribution of load carrying capability 3. steel electric pole Product information Steel tower type Tubular steel pole Voltage 220kV and below Material Q235,Q345,Q420 Welding CO2 protection welding or submerged arc auto methods Shape Generally round/polygonal face, and can be designed as the customers require. Surface laye Zink layer with hot
팔각형 11.8m 4000 단 전력 폴란드 항복 강도 355mpa
Polygonal 11.8m 4000 Dan Electrical Power Pole For Transmission Line Project Specifications Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers
선택적 파우더 코팅을 가진 다각형 샤프트 전기 전력 전구
Polygonal Shafts Electrical Power Pole with Optional Powder Coating Specifications Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement Base plate: Base plate is square or round in
지속 가능하고 녹색 전력 전송을위한 12m 14m 2 션에 친환경 전력 극
12m 14m 2sections Eco-Friendly Electrical Power Pole for Sustainable and Green Power Transmission Specifications Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and
8각 원추형 10m 전력 전주 (설계 하중 300~1000kg, 고내식 코팅 적용) - 송전용
Octagonal Conical 10m Electrical Power Pole For Power Transmission with High Anti-corrosion Coating The power pole of our company are made from quality sheets through bending, forming, automatic welding, hot dip galvanization and powder coating. We owned advanced production-line, it included Flatting machine, Steel plate shearer, bending machine, Auto-closed up machine, submerged arc welding machine and powder coating line, and our workmanship and quality control was achieved
Q345 물자 30FT 전력 폴란드 옥외 다각형 1 단면도
Outdoor Polygonal Q345 Material 30FT Electric Power Pole 1 Section Specifications: Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Design Load in Kg 300~ 1000 Kg applied to 50cm from the to pole Marks Name plate through rivert or glue ,engrave ,emboss as per customer requirement Surface treatment Hot dip galvanized color polyester power or
1 8M를 2.75mm 직류 전기를 통했습니다 전력 폴란드를 110KV 전송을 위해 등급을 매기십시오
Grade One 8M Galvanized Electric Power Pole 2.75mm for 110KV Transmission Description: Standard Accessory -Top plate -Base plate -Bottom strip -Standard hole -Climbing rung -Anchor bolt -Bitumen protection -Painted marking -Removable ladder Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with
18m 전기 선을 위한 전력 극이 Q235 뜨거운 복각에 의하여 직류 전기를 통했습니다
18m Q235 hot dip galvanized electrical power pole for electric line Specifications 1.Material:ASTM A572,S355,Q235,Q345 or equivalent Internation standard 2.Voltage:10KV,110KV,132KV,220,500KV,or other 3.Serive Lifetime:>30 years 4.Type test and damage test: accepted 5.Welding method:CO2 welding or Submerged arc auto welding 6.OEM service: available The products made by us is high resisitivity against heat ,humidity ,moisture, water etc. Owning to use the rare earth special
